Data Backup
12.1 Data transfer via RS232 interface
Surface grinding
318 Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
5HFHLYH
0RUH
(UURU
ORJ
Further softkeys
Load files via the RS232 interface.
The following function is provided at this level:
Transmission protocol
This log contains all transmitted files including status information:
● For files to be output
: name of file
error log
● For files to be input
: name of file and path
error log
Table 12- 1 Transmission messages
OK Transmission completed successfully
ERR EOF End-of-text character received, but archive file incomplete
Time Out The time monitoring is reporting an interruption of the data transfer
User Abort Data transfer aborted by the <Stop> softkey
Error Com Error at the COM 1 port
NC / PLC Error Error message from the NC
Error Data Data error
1. Files read in with / without header
or
2. Files transmitted without file names in the punched-tape format
Error File Name The file name does not correspond to the name convention of the
NC.
To Next Page
Loading...
Need help?
General
