5 Parameters 01.99
6FC5198-6AA60-0BP1 © Siemens AG 1999 All Rights Reserved
5-6 SINUMERIK 840C, OEM Version for Windows (BA)
5.2.2 Entering and correcting data
If the cursor has been positioned on the desired item of data, enter the desired
value via the alphanumeric keyboard.
If the input value is correct, you conclude the input with this key. The value is
transferred to the memory.
In the input line you can delete characterwise from the right to the left.
You can activate the cursor in the input window and move it with the cursor
keys to insert and delete characters. If you press this key again, you deactivate
the cursor.
With the EDIT WORD key you can modify the current value by addition or
subtraction (does not apply to setting data and R parameters).
Current value: 50
New value: 45
If you wish to delete the value:
Overwrite the value with zero.
With the PLUS and INPUT keys you fix the cursor in the input line (e.g. with
tool offsets). Press the keys before you enter the value. The cursor remains
positioned on the selected input field even after you press INPUT. Fixing of
the cursor is deactivated with the next cursor movement.
Examples
-
^
5
To Next Page
Loading...
Need help?
General
