To Next Page

To Previous Page

6 Programming 01.99

SINUMERIK 840C, OEM Version for Windows (BA)

6-25

6.2.5 Data communication between NCK and MMC

The data manager can also be used to exchange NCK-compatible data between

the MMC and the NCK memory.

6.2.5.1 Loading data

Proceed as follows to load a complete workpiece:

• Select the right-hand combo box with the EDIT key.

• Open the combo box with the RIGHT ARROW key and use the vertical

ARROW keys to position the selection bar on "NC Program Memory".

• Press the INPUT key to enter the selected item in the combo box.

• Select the left-hand combo box with the EDIT key.

• Open the combo box with the RIGHT ARROW key and use the vertical

ARROW keys to position the selection bar on the desired workpiece.

Fig. 6-13 Loading workpieces

• Press the INPUT key to enter the workpiece in the combo box.

• Press the COPY softkey.

The selected workpiece is loaded into the NCK program memory, i.e. the files

of the workpiece are transferred according to the commands in the job list. The

SELECT instructions in the job list are not processed.

Loading workpieces

Siemens SINUMERIK 840C Operator's Guide

Other manuals for Siemens SINUMERIK 840C