Siemens SINUMERIK 840C - Program Parameters; Tool Offsets

5 Parameters 01.99
6FC5198-6AA60-0BP1 © Siemens AG 1999 All Rights Reserved
5-8 SINUMERIK 840C, OEM Version for Windows (BA)
5.3 Program parameters
With the PROGRAM PARAMETERS softkey you select the area.
On selecting PROGRAM PARAMETERS, the softkey bar appears.
TO
geo + base
TO
wear
Zero
offset
Angle of
rotation
R param.
central
R param.
chan. spec.
Search
The following data is stored in the PARAMETER/PROGRAM
PARAMETERS area:
• Tool offsets
• Zero offsets
• Angles of rotation
• R parameters (channel-specific and central)
• Plane.
5.3.1 Tool offsets
You press the PROGRAM PARAMETERS softkey. The tool offsets
(geo + base, i.e. P0 to P4 and P8 and P9) are displayed on the screen:
Fig. 5-4 Tool offsets
Program
parameters
Program
parameters