1 Introduction - SINUMERIK 840C and its Operation 01.99
6FC5198-6AA60-0BP1 © Siemens AG 1999 All Rights Reserved
1-12 SINUMERIK 840C, OEM Version for Windows (BA)
1.7 File manager and control panel
The File Manager and the Control Panel of MS-WINDOWS are available on
the SINUMERIK 840C for global file manipulation and system settings within
the MMC areas.
Fig. 1-8 MS-WINDOWS Control Panel
The Control Panel is used particularly for the following settings:
• Screen colors
• Time
• Installation and configuration of a printer
The File Manager and Control Panel can be selected from the Diagnosis
menu in the Area Switchover.
Selection of these menu items is password-protected as standard.
To Next Page
Loading...
