4 Machine 01.99
6FC5198-6AA60-0BP1 © Siemens AG 1999 All Rights Reserved
4-10 SINUMERIK 840C, OEM Version for Windows (BA)
4.2.3.2 Spindle utilization display
This bar chart displays the percentage of spindle utilization in the current
operating mode. The display appears only if a digital drive is used.
Actual value Override Position Setpoint value
F = 70% F =
S1 = 85% 0.00 S1 = 0
0.00 M0.00
0
Utilization (%)
Designation of the bar chart
• until SW 5.2: Performance
• as from SW 5.4: Utilization
Bar chart
Utilization
Note
To Next Page
Loading...
Need help?
General
