Diagnostics and service
5.6 Action log
HMI Advanced (IM4)
158 Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
Saving logs
To read out the log files, proceed as follows:
1. In order to save the log files, select "Save log".
The following files can be saved:
– ACTION.COM (binary file)
– ACTION.LOG
– CRASH.COM (binary file)
– CRASH.LOG
2. The logs are saved under ..\Diagnosis\Log files.
For example, select "Services" → "Data Out" → "Disk", in order to read out the log file.
5.6.4 "NCDDE Trace" log
Diagnostics with "NCDDE Trace "
Press the "Trace" softkey to open the following dialog:
Figure 5-8 "NCDEE Trace" dialog
To Next Page
Loading...
