Siemens SINUMERIK - 2.3 Machine data help; 2.3.1 Function

Alarm/Machine data help
2.3 Machine data help
Online Help (HE1)
32 Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
2.3 Machine data help
2.3.1 Function
The machine data help is based on the "PDF help", i.e., when help is called up, a PDF file is
opened and the relevant alarm is displayed on the controller in Adobe Reader.
The files containing the machine data are stored in the directories below:
• Siemens MD: F:\MMC2\HLP
• User MD: F:\USER\HLP
File names
The file names below must be adhered to (must not be changed), even for the purposes of
additional user MD:
• N_NCK_GR.PDF [German], N_NCK_UK.PDF [English]
• C_NCK_GR.PDF, C_NCK_UK.PDF
• A_NCK_GR.PDF, A_NCK_ UK.PDF
• S_NCK_GR.PDF, S_NCK_ UK.PDF
• DISPL_GR.PDF, DISPL_ UK.PDF
• DROT_GR.PDF, DROT_ UK.PDF
• DLIN_GR.PDF, DLIN_ UK.PDF
• HYDRM_GR.PDF, HYDRM_ UK.PDF
The names of the associated TXT files (contain the jump list) must therefore be as follows:
• N_NCK_GR.TXT [German], N_NCK_UK. TXT [English]
• C_NCK_GR. TXT, C_NCK_UK. TXT
• A_NCK_GR. TXT, A_NCK_ UK. TXT
• S_NCK_GR. TXT, S_NCK_ UK. TXT
• DISPL_GR. TXT, DISPL_ UK. TXT
• DROT_GR. TXT, DROT_ UK. TXT
• DLIN_GR. TXT, DLIN_ UK. TXT
• HYDRM_GR. TXT, HYDRM_ UK. TXT