Siemens SINUMERIK Commissioning Manual

Configuring the system
2.1 System settings
PCU-Basesoftware (IM8)
Commissioning Manual, 03/2009, 6FC5397-1DP10-4BA0
35
4. Under the "General" tab, select the "Use the following IP address" option and enter the IP
address and the subnet screen form.
Recommended setting for the first PCU:
5. Enter the required new IP address and confirm the settings with "OK".
2.1.3 How to add the PCU to a domain
Requirement
Only a user with the corresponding entitlement, e.g. a domain administrator, can add a PCU
to an existing domain.
Domain Controller (DC)
A domain controller (DC) is a server for central authentication and authorization of
computers and users in a network. In a network with a domain controller, several computers
are combined to form one domain.

Siemens SINUMERIK Specifications

General

Interface	Ethernet, PROFIBUS, PROFINET, USB
Programming Languages	DIN/ISO
Display	TFT color display
Compatibility	Siemens drives and motors
Software	SINUMERIK Operate
Control Unit Type	CNC (Computer Numerical Control)
Safety Functions	Integrated safety functions up to SIL 3/PLe