Expanding the user interface
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
6-1
Configuring environment
6
6.1 6.1 Scope of supply
Overview
The software that interprets the configuration files for user interfaces and provides or
activates the functions described is included in the scope of delivery of the HMI software,
along with an ASCII editor for creating the content of the configuration files (program editor).
Products
ShopMill on NCU and ShopTurn on NCU are based on HMI Embedded sl. HMI Embedded
WIN32 and HMI Advanced can be combined on a single hardware platform. Thus, the
operating systems of these products are available as alternatives to HMI Advanced on a
single hardware platform.
Differences in the system
Because of the differences in the hardware, the configuration files are created in another
way:
● HMI Advanced on PCU 50 has a hard disk.
● HMI Embedded sl only has RAM and user memory on the CF card.
● HMI Embedded WIN32 on PCU 50 or PC with Windows evaluates hard disk configuration
files but operates in the same way as HMI Embedded sl in all other respects.
Creating displays
If the configured screen forms are to include images, then a suitable graphics program (e.g.,
MS Paint) will be required.
See also
Search function principle (Page 6-10)
To Next Page
Loading...
Need help?
General
