Commissioning a system
1.2 User administration
PCU-Basesoftware (IM8)
10 Commissioning Manual, 03/2009, 6FC5397-1DP10-4BA0
Service Desktop
The service desktop provides the HMI+Service user with a Windows desktop, which is
expanded to include tools and functions for service tasks, such as manage users, install
software, save/restore data, check system integrity, etc.
Windows desktop
The HMI user is able to use a Windows desktop which can be expanded to suit his or her
individual needs.
Starting ServiceCenter Users
Using this link on the service desktop, you can start ServiceCenter Users as an HMI+Service
user. In ServiceCenter Users, the boot-up behavior of the PCU as well as settings for the
HMI program and desktop are set globally for all users and individually for specific users.
The users are managed in the "ServiceCenter Users", so that the commissioner/service
technician no longer has to make corresponding settings directly in the registry.
1.2.2 Global user settings
"Global Settings"
As the HMI service user, you set parameters under "Global Settings" for the system
behavior:
● When the PCU is booting up
● When the HMI program is starting
● With reference to the desktop
Note
The scenario depicted in the images below assumes HMI-Advanced software has been
installed.
Using ServiceCenter Users
Buttons:
● If you press the "Reboot" button, the system immediately reboots (without prior
prompting).
● Use "Exit" to quit ServiceCenter Users.
To Next Page
Loading...
Need help?
General
