Siemens SINUMERIK Commissioning Manual

List of the INI Files
A.25 TASKCONF.INI
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
327
A.25 TASKCONF.INI
Overview
Softkeys and softkey bars for user-specific operator areas are configured in the file
TASKCONF.INI.
[CONTROL]
MDIList=MntMMC\MntMMC.mdi
ControlFile=MntMMC\MntMMC.zus
ScreenTwips=1
[DEBUG]
;MDISize 0 = Debug, 1 = Full screen
MDISize=0
;Buttons: 0 = button invisible, 1 = button visible
Stop_Button=1
; Here you can configure a skeleton application. Set instead
; APPLICATION, the section name configured in regie.ini.
; For every section name in regie.ini with
; Task i = name:= mntmmc cmdLine:= "SektionName", ... assigned
; the section name must be configured here for an
; autonomous section.
[APPLICATION]
; HSK1.. - HSK8.. (horizontal softkeys)
; HSK9.. - HSK16.. (ETC softkeys)
; VSK1.. - VSK8.. (vertical softkeys)
; background picture (default : none)
; 1 : machine configuration
; <filename> : load bitmap from OEM directory
Picture=
; index [1,.. initial application (default : none)
StartIndex=
; 0 : permanent task (default)
; <> 0 : terminate task at recall
TerminateTask=
;=================================================;
; for each softkey (HSK1 - HSK16 / VSK1 - VSK8) ;
;=================================================;
; taskid (see regie.ini) or logical task name
; (program/<root> or ExitButton)
; !!! ExitButton, display button for shutdown of HMI-Adv !!!
HSK1Task=
; 0 : recall to calling process (default)
; <> 0 : terminate application at recall (appends
; TerminateTask to HSK1Command)

Siemens SINUMERIK Specifications

General

Interface	Ethernet, PROFIBUS, PROFINET, USB
Programming Languages	DIN/ISO
Display	TFT color display
Compatibility	Siemens drives and motors
Software	SINUMERIK Operate
Control Unit Type	CNC (Computer Numerical Control)
Safety Functions	Integrated safety functions up to SIL 3/PLe