Siemens SINUMERIK

Programming support
3.3 Activating a dialog from the NC program
Expanding the user interface
3-6 Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
GUD file User-data definition file accessed on
reading/writing of variables.
Graphics file
(HMI Advanced only)
File name of the BMP graphic to be inserted
Acknowledgment
variable (HMI
Advanced only)
or display time
Acknowledgment
variable
Display time
in acknowledgment mode "A"
in acknowledgment mode "N"
Text variable Screen header or comment text from a text
variable in the COM file.
Acknowledgment
mode
"S" for Synchronous
"A" for Asynchronous
"N" for No Quit
Acknowledgment via "OK"
softkey
Acknowledgment via
configured softkeys
No acknowledgment, but
display time
Storage structure of graphics
*.bmp files are stored in resolution-specific subdirectories:
● For standard cycles:
\CST.DIR\HLP.DIR\640.DIR For 640 dpi resolution
\CST.DIR\HLP.DIR\800.DIR For 800 dpi resolution
\CST.DIR\HLP.DIR\1024.DIR For 1024 dpi resolution
● For user cycles:
\CUS.DIR\HLP.DIR\640.DIR For 640 dpi resolution
\CUS.DIR\HLP.DIR\800.DIR For 800 dpi resolution
\CUS.DIR\HLP.DIR\1024.DIR For 1024 dpi resolution
● For manufacturer cycles:
\CMA.DIR\HLP.DIR\640.DIR For 640 dpi resolution
\CMA.DIR\HLP.DIR\800.DIR For 800 dpi resolution
\CMA.DIR\HLP.DIR\1024.DIR For 1024 dpi resolution