Configuring the HMI system
2.3 Connecting network drives
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
67
Configuring texts for softkeys
Plain text identifiers for selecting network drive connections with softkeys can be stored as
language-dependent user alarm texts under numbers 89901 to 89905 in a user text file that
is known to the message block (see MBDDE.INI, [TextFiles] section). Text number 89901
correlates here to MD 9676 CMM_DIRECTORY_SOFTKEY_PATH1, etc.
Example:
MBDDE.INI:
...
[TextFiles]
USER_PLC=F:\DH\MB.DIR\MYTXT_
MYTXT_GR.COM:
89901 0 0 "" Reserved
89902 0 0 "F:\R4711" Softkey text for softkey 2
89903 0 0 "R4712/ MMC1" Softkey text for softkey 3
89904 0 0 "R4713/ MMC2" Softkey text for softkey 4
... (2 blanks denote a line break)
Availability in the operating areas
The network drives are available in the following operating areas:
● In the MACHINE operating area on the expanded SK (softkey) bar behind the "Program
overview" softkey
● In the PROGRAM operating area as an extended softkey bar in the main menu
● In the SERVICES operating area under "Manage data" (if 3 network drives are
configured, 3 are displayed directly as horizontal softkeys, the fourth appears after
pressing the ETC button)
● In the SERVICES operating area under "Data on" and "Data off" under the second
vertical softkey "Network drives …"
The softkeys in the expanded softkey bar are assigned accordingly to MD 9676 (SK1) to
9679 (SK4) (i.e., with gaps if necessary). The configured text appears on the softkey. If no
labeling text is configured for the softkey, the value of the corresponding machine data is
displayed.
Assigning access authorization for drives/computers
Access authorizations are configured individually for each drive in the following display
machine data:
For the Program and Services:
$MM_USER_CLASS_DIRECTORY1_P (9510)
$MM_USER_CLASS_DIRECTORY2_P (9511)
$MM_USER_CLASS_DIRECTORY3_P (9512)
$MM_USER_CLASS_DIRECTORY4_P (9513)
To Next Page
Loading...
Need help?
General
