Safety information
2.2 Improper device modifications
SIPART PS2 with and without HART
Operating Instructions, 10/2013, A5E00074631-11
15
Improper device modifications
Improper device modifications
Danger to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
• Only carry out modifications that are described in the instructions for the device. Failure
to observe this requirement cancels the manufacturer's warranty and the product
approvals.
Requirements for special applications
Due to the large number of possible applications, each detail of the described device
versions for each possible scenario during commissioning, operation, maintenance or
operation in systems cannot be considered in the instructions. If you need additional
information not covered by these instructions, contact your local Siemens office or company
representative.
Note
Operation under special ambient conditions
We highly recommend that you contact your Siemens representative or our application
department before you operate the device under special amb
ient conditions as can be
encountered in nuclear power plants or when the device is used for research and
development purposes.
To Next Page
Loading...
