SIPART PS2 with and without HART
Operating Instructions, 10/2013, A5E00074631-11
31
Basic safety instructions
Unsuitable device for the hazardous area
Danger of explosion.
• Only use equipment that is approved for use in the intended hazardous area and
labelled accordingly.
High operating force with pneumatic drives
Risk of injury when working on control valves due to the high operating force of the
pneumatic drive.
• Please observe the corresponding safety instructions for the pneumatic actuator in use.
Lever for position detection
Danger of crushing and shearing with mounting kits which use a lever for position detection.
During commissioning and ongoing operation, severing or squeezing of limbs could occur
as a result of the lever. Risk of injury when working on control valves due to the high
operating force of the pneumatic drive.
• Do not reach into the range of motion of the lever following mounting of the positioner
and mounting kit.
Impermissible accessories and spare parts
Danger of explosion in areas subject to explosion hazard.
• Only use original accessories or original spare parts.
• Observe all relevant installation and safety instructions described in the instructions for
the device or enclosed with the accessory or spare part.
To Next Page
Loading...
Need help?
General
