Connection
5.2 Pneumatic
SIPART PS2 with and without HART
94 Operating Instructions, 10/2013, A5E00074631-11
Integrated pneumatic connection
Structure
The following pneumatic connections are provided at the rear side of the basic device for the
integrated attachment for single-acting linear actuators:
● Actuating pressure Y1
● Exhaust air outlet
These connections are sealed with screws when the device is delivered.
The exhaust air outlet is corrosion-resistant for the blanketing of the pick-up room and the
spring chamber with dry instrument air.
Figure 5-24 Integrated pneumatic connection
To Next Page
Loading...
