Chapter 3: Service program PowerSys SWT 3000 Equipment Manual
Page - 6 Edition p3_3_2x 08/09 © SIEMENS AG 2008
The menu options
With the menu options the serial interface of the PC to the device has to be configured. If neces-
sary the program language can be adjusted as well.
In the versions ≥P3.2.216 the Language English resp. Russian is selectable.
Figure 4: Selection of the program language
Create system log
With an online PowerLink resp. SWT 3000 session the <Create system log> function is activated
in the options menu.
Figure 5: The create system log function
The function may be used in case of problems occurring in a PowerLink resp. SWT 3000 connec-
tion.
It creates an encoded zip file containing important system information including the database of
the equipment or the event memory from an (integrated) SWT 3000.
Please send the zip file to SIEMENS office for evaluation.
To Next Page
Loading...
Need help?
General
