Siemens SWT-3000 - Equipment Manual Swt 3000 Chapter 2: Installation and Commissioning

Installation and Commissioning SWT 3000 Equipment Manual
Contents:
General safety regulations -------------------------------------------------------------------------------------------------------- 4
Transport and storage------------------------------------------------------------------------------------------------------------- 5
Installation ------------------------------------------------------------------------------------------------------------------------- 6
Equipment manual ------------------------------------------------------------------------------------------------------------- 7
Installation procedure------------------------------------------------------------------------------------------------------------- 7
Cabling and equipment----------------------------------------------------------------------------------------------------------- 7
Grounding----------------------------------------------------------------------------------------------------------------------- 7
Connecting the device without FOM modules -------------------------------------------------------------------------------- 8
Connecting plugs------------------------------------------------------------------------------------------------------------------ 8
Equipment of the sub rack without FOM slots-------------------------------------------------------------------------------- 9
Equipment of the IFC slots ------------------------------------------------------------------------------------------------------ 9
Connecting the device with FOM modules -----------------------------------------------------------------------------------10
Connecting plugs-----------------------------------------------------------------------------------------------------------------10
Equipment of the sub rack with FOM slots-----------------------------------------------------------------------------------11
Pin assignments of the SWT 3000 modules:----------------------------------------------------------------------------------12
Pin assignment of the IFC-x module ------------------------------------------------------------------------------------------12
Pin assignment of the PU3f module: ------------------------------------------------------------------------------------------13
Signals of the line interface analog (LIA)-------------------------------------------------------------------------------------14
Connection of the digital line interfaces --------------------------------------------------------------------------------------14
Signals for the LID-1 (Line Interface Digital 1) -----------------------------------------------------------------------------15
Signals for LID-2 (Line Interface Digital 2)----------------------------------------------------------------------------------16
Service channel interface SC ---------------------------------------------------------------------------------------------------16
Remote access interface SSR---------------------------------------------------------------------------------------------------16
Remote Monitoring (RM) interface SSB--------------------------------------------------------------------------------------17
Pin assignment of the CLE module--------------------------------------------------------------------------------------------17
Pin assignment of the ALRS module------------------------------------------------------------------------------------------18
Pin assignment of the ALR module--------------------------------------------------------------------------------------------19
Jumper settings for the SWT 3000 modules:---------------------------------------------------------------------------------20
Jumper settings for the IFC modules ------------------------------------------------------------------------------------------20
Jumper settings for the PU3f module------------------------------------------------------------------------------------------21
Links for selecting the line interfaces LID-1 ---------------------------------------------------------------------------------22
Links for the selection of line interfaces LID-2 ------------------------------------------------------------------------------22
Selection of the input gain for the G703.6 interfaces------------------------------------------------------------------------22
DLE settings for the LID-x connection via FOM-------------------------------------------------------------------------22
Jumper settings for the CLE module ------------------------------------------------------------------------------------------23
Jumper settings for the FOM module------------------------------------------------------------------------------------------24
The FOBox------------------------------------------------------------------------------------------------------------------------25
Interfaces of the FOBox------------------------------------------------------------------------------------------------------25
Power supply of the FOBox -------------------------------------------------------------------------------------------------26
Alarm relay contacts of the FOBox-----------------------------------------------------------------------------------------26
Signification of the LED -----------------------------------------------------------------------------------------------------26
Jumper settings of the FOB--------------------------------------------------------------------------------------------------27
ALR Module----------------------------------------------------------------------------------------------------------------------28
Visual Indication --------------------------------------------------------------------------------------------------------------28
Test switch S1 -----------------------------------------------------------------------------------------------------------------28
Jumper settings for the ALRS module ----------------------------------------------------------------------------------------29
ALR jumper settings-------------------------------------------------------------------------------------------------------------30
Commissioning ------------------------------------------------------------------------------------------------------------------------31
Switching on the power supply-------------------------------------------------------------------------------------------------31
Switching on the device---------------------------------------------------------------------------------------------------------31
Connecting the service PC------------------------------------------------------------------------------------------------------31
PC requirements---------------------------------------------------------------------------------------------------------------31
PC Connecting cable----------------------------------------------------------------------------------------------------------32
Page - 2 Edition p3_3_2x 08/09 © SIEMENS AG 2008