Chapter 3: Service program PowerSys SWT 3000 Equipment Manual
Page - 14 Edition p3_3_2x 08/09 © SIEMENS AG 2008
When operating the browser button the following menu appears for selection of the dongle file.
Figure 20: Opening the dongle file with the browser function
With operating the <OK> button in the <Select dongle file> menu, the PowerSys overwrites the
existing dongle with the new releases.
The dongle on the CSP module is only updated if the serial number in the
dongle file and the serial number in the dongle is identical.
For dongle upgrade of one link at least two dongle files are necessary!
To Next Page
Loading...
