General
Application Manager
Application Manager is a software application which works as a Shell on MARIS computers
and restricts the access to the computer in order to protect the PC and to run ECDIS900 in
Approval mode.
In Approval mode the PC is protected against any changes which may affect the Operating
system and it is impossible to install any third party software. In this mode ECDIS computer
access is restricted to mandatory ECDIS functions and to others MARIS applications which are
selected during configuration. AM replaces Windows Explorer and all standard shortcuts such
as Ctrl-Alt-Del are disabled.
The configuration of Application manager is done by authorized technician and described in
the ECDIS900 installation manual..
Click in the grey rectangle .
• The applications listed on the left under Auto are always running and cannot be
stopped.
• The applications listed on the right under Other title are the applications the user
is allowed to run and stop.
Using the top icons the user can reboot or stop the PC and access to the Securituy settings described in the
Installation manual
:
To Next Page
Loading...
