Simrad Maris ECDIS900 - Ship to Anchoring Point, Range and Bearing

Ship to Anchoring point, range and bearing
REMARK Use the object menu for removing a single VRM/EBL. To remove all VRM/EBL use
the 'Del' key or the 'Clean chart' function from the chart menu.
SHIP TO ANCHORING POINT, RANGE AND BEARING
Right click on the Ship to point, range and bearing icon and plot an anchoring point
on the chart.
The information window displays the Range and Bearing from the bow of the ship to the
Anchoring point and the ETA.
The position of the pop window, of the VRM/EBL is user adjustable.
Left click and drag to reposition the prompt window.
29