Simrad Maris ECDIS900 - Waypoint Properties

Waypoint properties
• The direction of the route will now be reversed and an arrow displayed on each leg shows
the direction of the route.
NOTE
The Reverse function also re-numbers the waypoints.
LOCK/UNLOCK A ROUTE
• Locate the cursor on a route leg, right click right and select Lock on the pop-up menu.
• Locking and Unlocking the route is also possible in the
Route Plan
and in
Route Properties
.
The route will now be protected from unauthorized alterations.
NOTE
Keyboard modifications in the Route plan window are also impossible when the
route is locked.
UNDO
• Undo function is applicable only for route modification. All modifications made to a route
can be undone except for the function “Split the route”. Press several times to undo
several modifications made to the route.
• Access “Undo” by right clicking on the route and selecting the “Undo” from the pop-up
menu.
IMPORTANT when the function Undo is activated several times the modifications made to
the selected route will be cancelled one by one.
WAYPOINT PROPERTIES
Locate the cursor on a waypoint, right click and select Properties from the pop-up menu.
Alternatively move the cursor over the waypoint and press F4 several times to access the
waypoint Properties dialogue.
The properties dialogue displays two tabs: General and Information
139