Simrad Maris ECDIS900 - Target List; Target Window

Target List
TARGET LIST
To display the list of the tracked targets click on the Target List button.
• A double click on the target name will centre the chart on the target.
• A double click on the CPA title sorts out the targets by CPA values. Same with TCPA
values.
ECDIS900 acquires targets via serial line from ARPA radar connected to the system or using
MARIS’ radar interface kit. In addition ECDIS receives by serial line the targets from AIS when
AIS is interfaced to ECDIS.
CENTRE THE CHART AND ACCESS PROPERTIES
• Double click on the target name centres the chart on the target.
• Right click on the target’s name to access to target’s properties.
SHOW HIDE TARGETS
Press Hide target to hide the targets. All targets are hidden except the target on CPA/TCPA
alarms which will always been displayed.
RELATIVE VECTOR
Press Draw relative vector button to display the targets with relative vector. The relative
vector is displayed with a dotted line to make a difference with the absolute vector.
AIS MESSAGE
See AIS chapter, paragraph
Messages
.
AIS SERVER
This function is dedicated Norwegian Pilots and allows connecting to AIS server providing the
AIS traffic around Scandinavia.
I n Sensor Monitor create a sensor
called Client AIS Server, start and stop the display of AIS data in
ECDIS using the button Start or Stop AIS server.
TARGET WINDOW
Right click on the target (ARPA or AIS) and select the menu “Display in a window”.
A floating window centred on the target and following automatically the target is displayed.
199