Delete a waypoint
Input the range and bearing then press OK to enter the new waypoint.
Press OK and New to enter more than one new waypoint.
The waypoint(s) will be added after the previously selected one and the details for the route
will be updated accordingly.
NOTE
when a new waypoint is created a default number is given. In order to have a
consistent list of names for the waypoints it is necessary to re-number the
waypoints by clicking once in the column title called Name
DELETE A WAYPOINT
Select a waypoint in the list by clicking on its name and press Delete waypoint button
or push the key Delete.
IMPORTANT
A route is defined by at least two waypoints. If the route contains less than two
waypoints the route is deleted and the route plan window closed.
NOTE
Keep in mind that the selected waypoint will be deleted immediately, but in case of
mistake press Undo button to recover the deleted waypoint
PRINT
Press the Print route plan button
The route plan is transferred to the text file, opened immediately
148
To Next Page
Loading...
