Simrad Maris ECDIS900 - Edit Menu

Edit menu
EDIT MENU
U
NDO
Allows the most of the actions performed on NE or User’s data objects to be undone.
When Undo is not possible, the menu is disabled.
There are up to ten levels of undo, meaning that the ten last functions applied on objects can
be cancelled.
NOTE
The Undo function is applicable only on NE and OE functions
CUT / COPY
Delete or Copy the selection and copy it to the clipboard.
PASTE
Copy the selection added to the clipboard to the active layer.
With NE objects, the selection is simply copied in the NE layer.
For OE objects the functions Cut/Copy/Paste are used to copy objects from one layer or one
file to other one. See Chapter OE - Layers.
PASTE TO POSITION
Select ‘Paste to Position’: the cursor changes and the selection will be pasted at the mouse
click location. This function is equivalent to the move selection action performed with the
mouse.
DELETE ALL SELECTED
Delete the Selection
SELECT ALL OBJECT EDITOR
Empty the selection and select all OE loaded objects that do not belong to a locked layer.
219