Selection
Use the tool “Select OE objects” to select OE objects.
OTHER METHODS TO SELECT OBJECTS
• Select a single object: click on the object.
• Select two or more objects (Selection containing several objects): click on each object
whilst keeping the <Shift> key pressed.
• Activate the menu Select All Object Editor from the menu Edit.
• Activate the menu Select All Navigation Editor from the menu Edit.
• Activate the menu Select All Alarms objects from the menu Edit.
IMPORTANT selection and locked layer
When an OE object resides in a locked OE layer, that particular object is not selectable. For
more information about layers see chapter OE - Layers.
MOVE THE SELECTION
• Move the cursor over one of the selected points and when the cursor changes to
the hand shape, drag the whole selection to the desired position.
• When the cursor changes to the large arrow only the selected point will be
moved.
DELETE THE SELECTION
Select the object(s) and push the delete button
OTHER METHODS OF DELETING THE SELECTION:
• Press the Delete key.
• Select ‘Cut ‘from the Edit menu.
• Select ‘Delete all selected’ from the Edit menu.
218
To Next Page
Loading...
