Simrad Maris ECDIS900 - Option Time; Option Back up

Option Time
IMPORTANT
The console configuration cannot be modified if the ECDIS user data is password protected.
For more information about the protection schemes in ECDIS900 see the paragraph System
Protection.
OPTION TIME
ECDIS900 operates and displays the local time, which is calculated from UTC time and time
zone information.
The operator can adjust the UTC time manually or choose UTC time to be automatically
adjusted from the GPS. Usually this is default settings and it synchronizes time in the ECDIS
LAN.
The operator is responsible for the manual selection of the time zone.
NOTE
The time zone is by default displayed with the sign + in West hemisphere and the
sign - for the East one.
CHART TIME
The chart time is used when a weather forecast file is loaded in ECDIS to select a date in order
to display the weather situation in the future.
It is also used in the same way when the tide information is displayed on the chart
OPTION BACK UP
Select the data to back up in on the top panel.
Data can be saved on the hard disk or on any PC of the LAN.
37