Settings
When operating the Docking mode the following data is displayed:
• distance to anchoring point and speed for both bow and stern.
• 4 historical positions (step adjustable from 3 to 15 seconds)
• predicted position ( see
)
• For each anchoring point, course, distance and speed (cm/s) are displayed.
• 2 speed vectors are displayed from bow and stern.
SETTINGS
The following user defined settings are used during the calculation:
• Maximum ship speed: limit used in the calculation
• Maximum turn rate: limit used in turn rate calculation
• Prediction duration: ship symbol plot interval
• Time to reach ROT: sets limit to turn rate acceleration in the calculations. After rudder
change, the ship starts turning, and ROT accelerates till constant ROT is reached. (Time to
reach ROT = 0 means that using turn rate acceleration in the calculations is disabled)
Historical values (heading, position and speed) are continuously recorded and processed:
248
To Next Page
Loading...
