Simrad Maris ECDIS900 - Centre on Ship

Centre on Ship
• If a new rectangle meets the rectangle that defines the limits of dynamic zones, a dynamic
centring zone is defined.
NOTE
After the new rectangle is defined the
Auto centring function is off.
So press the
Auto centring b
utton again.
CENTRE ON SHIP
To centre the chart on the ship click on the Centre on ship icon . The chart will
automatically be centred on the ship.
NOTE
Centre on ship is a one-time action
For scrolling the chart automatically according to the ship’s movements:
• Right click anywhere on the chart to display the pop-up menu.
27