Optimization settings
VDS calculates the required speed to achieve this voyage with fixed ETA and lowest
consumption.
Voyage or spot charters, COA voyage, BALLAST VOYAGE
The user enters the Estimated Time of Departure and lay days for loading. VDS calculates the
required speed to achieve this voyage within these limits and lowest consumption.
Voyage or spot charters, COA voyage, CARGO VOYAGE
The planned speed is fixed, the user enters the Estimated Time of Departure and VDS
calculates the best ETA and lowest consumptions.
Time charter
The planned speed is fixed, the user defines the Estimated Time of Departure and VDS
calculates the best ETA and lowest consumptions.
Cargo heating
This option is applicable only for some tankers when the cargo requires to be heated. In this
case the total consumption is calculated as sum of propulsion and cargo heating
consumptions.
OPTIMIZATION SETTINGS
W
AVES CONSTRAINS
The optimized route can be controlled to avoid areas where the wave heights exceed certain
limits set by the captain in the “Constrains” table.
276
To Next Page
Loading...
