Current information
MODIFYING A POINT
• Select the point, click on the point and drag the mouse to the new location.
• Click right button on that point, open the dialogue Properties and modify position, type
of point, time or log values.
DELETING A POINT
• Click right button on the point and activate the menu Delete All Selected.
• Select the point and press the key Del.
• Select the point and press the Delete button .
TIPS: Double click on the tool Point deletes all displayed points.
CURRENT INFORMATION
• Select the Current tool .
• Click on the chart and insert manually on the chart information about force and direction
of the current at the time the ship will pass that point.
DELETE CURRENT INFORMATION
• Click right button on the current arrow and activate the menu Delete All Selected.
• Select the current and press the key Del.
• Select the current and press the Delete button .
RANGE AND BEARING CALCULATION
• Select the Compass tool to measure distance and bearing between two points.
• To erase the information on the chart double click on the button.
POLYLINE
P
LOT A LINE
• Select the Polyline tool .
• A double click ends the line.
227
To Next Page
Loading...
