Simrad Maris ECDIS900 - Creating a Route by Mouse

Creating a route by mouse
NOTE
If only one waypoint is entered the route is cancelled
FORMAT
ECDIS accepts the delimiter ”space”, ”.” or ”,” in the inputs. For instance the following strings
for the latitude are compliant: 12 12.23N or 12 12 23N or 12,12,13N or 12,12 13n.
CREATING A ROUTE BY MOUSE
A route can be created graphically using the New Route tool on the toolbar or directly
by keyboard entry of the waypoint co-ordinates in the Route Plan window.
CREATE A ROUTE GRAPHICALLY
Click the New Route tool on the toolbar and then click on the chart at the point where the
route should begin. A waypoint (WP 001) indicated by an orange circle is placed at this point.
Double click to set the end point of the route. The Route name dialogue appears.
131