Simrad Maris ECDIS900 - Updates

Updates
INSTALL ALL CHARTS FROM THE CD
In order to speed up the installation procedure the system can install the full CD.
Click the Install all charts from CD button and the system will list all charts on the CD-ROM
along with the parameters: Number, Scale, Permits, Status and Name. Highlight all the charts,
using standard windows procedures, and then click the Install button.
INSTALL CHARTS ALONG THE ROUTES OR INSIDE SCREEN AREA
In order to reduce the number of ARCS charts installed on the hard disk, ECDIS900 can
automatically select the charts on the loaded Area CD that either intersects the loaded routes
or the screen area.
To achieve this, before activating the Chart Handling dialogue, load the routes or zoom and
scroll the chart at the desired location and then press the appropriate button.
Click the Install charts along the route button and the system will install the charts along
the loaded route.
Click the Install charts inside screen area button and the system will install all permitted
charts within with the screen area.
DELETE CHARTS
Select a chart or charts and press the Delete Charts button to remove the chart/s from the
collection.
WARNING
When deletion is confirmed the chart is deleted from the hard disk.
The
possi ble errors
, which may occur during the installation, are listed below.
UPDATES
In order to provide the navigation safety the navigator has to update chart collection with the
latest corrections. HO issues the Update CDs with the Notice to Mariners corrections and the
new charts editions each week.
There are two ways to update the chart collection:
• Updates can be installed from the Update CD issued by UKHO.
UPDATE BY CD
The UKHO issues an Update CD with the New Edition charts and Notice to Mariners
corrections each week.
Insert the update CD ROM in the CD reader and click the Apply update button.
58