Errors
The user should click on a shadowed chart to get all information about the chart and double
click on a shadowed chart to activate it.
To switch on the seamless mode tick the “with ARCS” check box in the Seamless Chart display
group. The default state is Simple scale. To get the best scaled ARCS displaying for the chart
area tick on the Full scale.
ERRORS
The following is a list of errors that can occur during ARCS chart management.
ECDIS ERROR MESSAGE Description What to do BA error code
Invalid (altered)
gb.lcn-file
License is invalid
and a checksum
error is detected
while reading the
GB.LCN file.
Re-install permits. If this
does not help contact
MARIS to correct the error.
WARNING:
The user must not change
the expiration date of the
license using text editor.
ARCS01
To Next Page
Loading...
