Ship properties
• Tick on Follow the ship.
HOTKEY
Press the F3 hot key to centre the chart on the ship’s position and activate the Follow the
ship function.
SHIP PROPERTIES
To view or change ship’s properties, click on the Ship properties icon .
Alternatively, click right on the ship’s icon and select Properties from the pop-up menu.
The Ship parameter window appears. For detailed overview of the ship’s parameters, see
.
SHIP TO POINT, RANGE AND BEARING
To set a point at a fixed range and bearing from the ship click on the Ship to point, range
and bearing icon .
The cursor will appear as a cross with a circle attached to it plus the actual range and bearing
data, measured from the Conning Position defined in ship parameter (Shape/GPS and
radar/Conning position).
Move the cursor to the desired position (range and bearing) then click left to fix the point.
28
To Next Page
Loading...
