Simrad Maris ECDIS900 - Event; Zoom; Standard Display

Event
A route defined by the waypoint and plotted from the MOB point is created and the
information required to return to the MOB point (bearing and distance from the ship to the
MOB point) is immediately displayed in the static information console.
To view and amend the properties of the waypoint, locate the cursor on the waypoint, right
click and select Properties from the pop-up menu.
DEACTIVATE MOB
Locate the cursor on the MOB waypoint and click right. Select Deactivate on the pop-up
menu.
DELETE MOB
Locate the cursor on the MOB waypoint and click right. Select Delete on the pop-up menu.
EVENT
To plot a new point on the chart at the ships location, click on the Event icon . The
geographical point is displayed on the chart with a special icon and stored in the user data
active layer.
A detailed overview of user data can be found under
Object Edi tor
.
ZOOM
Click on the Zoom in icon to zoom in one step.
HOT KEY
Press Hot Key F1 to zoom in.
IMPORTANT
In RCDS mode (Raster charts) clicking with the right button of the mouse in the Zoom in
button loads and displays another raster chart with a better scale under, if it exists.
Other methods of zooming can be found in
Cha r t s - Zoomi ng
.
Click on the Zoom out icon to zoom out one step.
HOT KEY
Press Hot Key F2 to zoom out.
STANDARD DISPLAY
• Click on the Standard Display icon to set the ENC or C-MAP display to standard mode.
• Click on the Standard Display icon to display ARCS chart at the original scale.
23