Simrad Maris ECDIS900 - List Box; Drop - down List Box; Push Button

List box
LIST BOX
The control lists values or parameters. To select item from the list, click on the proper one. The
selected item is ticked on. To deselect the one, click on the selected item. The item is ticked
off.
DROP-DOWN LIST BOX
A type of combined Text box and List box. The box contains the current value and the list is
initially not displayed. To view the whole list click on the <Down> arrow.
The whole list may be scrolled by use of the <Up> and <Down> arrows
PUSH BUTTON
A Push button is a rectangle containing an application-defined text label, an icon, or a bitmap
that indicates the action that will be performed after the button has been pressed (pushed).
The following kinds of buttons are used in the ECDIS900:
Control buttons:
• OK – save changes and close a dialogue
• Cancel – close a dialogue without saving
changes
• Apply – save changes without closing a
dialogue
Action buttons call dialogue box or perform other
action when pressed
Toggle button
defines one of two values of the
corresponding parameter. There are two kinds of
the toggle buttons:
• buttons that change the text depending on the
value
15