Switching to ARCS
CHECKING THE UPDATED OBJECTS ON THE CHART
• Select the option Display updated tiles borders in Chart settings dialogue to display the
borders of updated tiles.
• Press and hold “B” to display the base chart before updating.
• Release the key to display the updated chart.
EXAMPLE OF PRINTING
SWITCHING TO ARCS
It is possible to switch between chart types available in ECDIS by using a menu and dialogue
or a hot key.
BY MENU AND DIALOGUE
Right click on the chart and select Other charts and then ARCS in the menu.
ECDIS lists all available ARCS charts that contain the position on the chart where the cursor
was located when starting to switch charts.
61
To Next Page
Loading...
