Route properties
In the tab General the waypoint’s position and relative parameters can be adjusted.
• Name name of the waypoint, can be changed via keyboard.
• Latitude it is possible to edit the value manually
• Longitude it is possible to edit the value manually
• Time Zone To set the time zone of the waypoint if different from the system calculated
TZ.
• Display name Toggle to display or not display the name on the chart.
• Display description Toggle to display or not display the description on the chart.
• Lock Toggle to lock or unlock the details of the waypoint.
The Information tab contains information of the nearest forecast station and linked files.
ROUTE PROPERTIES
For route properties, locate the cursor on any leg of the route, right click and select
Properties from the pop/up menu. Alternatively move the mouse on top of the route and
press F4 several times to access the route Properties dialogue.
140
To Next Page
Loading...
