Simrad Maris ECDIS900 - Change Active Waypoint; Alarms; Route Monitoring Plan

Change active waypoint
CHANGE ACTIVE WAYPOINT
The active waypoint is selected automatically when the ship arrives at the waypoint. But at
any time the current waypoint can be changed manually.
There are two ways to select another active waypoint:
• Click right on the waypoint to be activated and select Activate in the pop-up menu.
• In the route plan, click right button on the name of the waypoint and select Activate.
ALARMS
When the XTD or Waypoint arrival alarms are active the ECDIS900 will trigger an alarm each
time the alarm parameters are met.
SETTING ROUTE ALARM PARAMETERS
• In the
Shi p Properties dialogue
, under the Alarms tab tick the boxes to activate the XTD alarm.
• In
Waypoint Properties
set the appropriate XTD parameters.
• In
Options/Route
, the Waypoint arrival indication and alarm distances are preset.
ROUTE MONITORING PLAN
When the active route is locked it cannot be edited. The user can only change the planned
speed for the remaining legs.
The active waypoint line is displayed in red, the selected waypoint line in blue.
To modify the route it is necessary to deactivate the route and then unlock it before editing.
DISTANCE TO GO
The Distance To Go in the console is measured from the ship to the last waypoint.
166