Set ETA
SET ETA
Click on the ETA value of the leg and enter a new ETA. Then the leg SOG will be re-calculated.
IMPORTANT Click on the title ETA to enter a new ETA for the last waypoint. In this case the
SOG will be recalculated and constant for all legs.
NEW WAYPOINT BY COORDINATES
Press the New WP by coordinates button.
The dialogue box appears
Amend the latitude and longitude if necessary then click OK to enter the new waypoint.
Click OK and New to enter more than one new waypoint.
The waypoint(s) will be added after the previously selected one and the details for the route
will be updated accordingly.
NOTE
It is not possible to enter a new waypoint before the first waypoint with this
method. To add a new waypoint at the start proceed as follow :
• Select the first waypoint.
• Press the New Waypoint by co-ordinates button and enter the name and co-
ordinates for the new waypoint.
• Right click on the first waypoint and select the menu Move after and select the
number of the newly created waypoint.
NOTE
when a new waypoint is created a default number is given. In order to have a
consistent list of numbers for the waypoints it is necessary to re-number the
waypoints by clicking once in the column title called Name
NEW WAYPOINT BY BEARING
Press the New WP by bearing button.
The input dialogue box appears
147
To Next Page
Loading...
