Simrad Maris ECDIS900 - Maris Radar Kit; MARI Radar Kit

MARIS Radar Kit
It is possible to drag the window and different scale may be selected by right clicking inside
the window. The window is closed by double clicking inside or selecting the menu “Close”.
REMARK
This feature is available on vector charts only.
MARIS RADAR KIT
G
ENERAL
MARIS PC Radar Kit consists of two parts: hardware and software.
Hardware, software and set up are described in document RadarKit MK6 Installation manual
delivered together with the PC Radar Kit.
Software part includes the following applications:
• Extractor/Tracker (VarpPCI.exe).
• Sensor Monitor (Sensor Monitor.exe).
• ETS Agent (ETSAgent.exe).
• PCI Board Adjustment (SetupETS.exe).
• Remote PCI Board Adjustment (RemoteSetupETS.exe).
• Oscilloscope (Oscilloscope.exe).
• MARIS ARPA-2000 (ARPA2000.exe).
NOTE
MARIS PC Radar Kit provides the ability of combining Radar
operations with the ECDIS and is fully approved to IEC 61174 for
overlay function. The Radar function ARPA2000 has not been tested.
The Sensor Monitor processes the navigational information from ship’s sensors and sends it
to Extractor/Tracker. In case if Extractor/Tracker does not react on change of heading check
SMonitor.ini file.
200