Print
START REPLAY
• To start the replay click on the Start Replay button .
• By default, the start time for replay is the time of the first logbook entry.
• To suspend replay click the Suspend button .
NOTE
During replay most of the navigation functions are available however the route
planning / monitoring functions are not enabled.
During the replay the chart is automatically loaded, scaled and scrolled and
the logbook window scrolls automatically to display the replayed data.
ADJUSTING THE REPLAY STARTING TIME
Three different methods are available:
• Use of the ‘Backward’ and ‘Forward’ buttons allows scrolling the logbook to adjust the
start time .
• One click of a button will adjust the time by one Jump step.
• Click in the text box time, select the appropriate field and enter the desired value .
• In the Logbook window, before starting the display double click on the line you want the
logbook to start.
JUMP STEP
The size of the Jump step, the amount of time to move for each click of the ‘Backward’ and
‘Forward’ buttons, can be adjusted by use of the ‘Up’ and ‘Down’ arrows.
NOTE
If the recording track function is active when rewinding or jumping, the track
recording will be stopped. To restart recording the track during the replay, it is
necessary to activate the track recording function again
ACCELERATION
Acceleration allows the operator to choose the acceleration rate for the display, the rate
being adjusted with the ‘Up’ and ‘Down’ arrows.
An acceleration value of 5 = replay in real time multiplied to 5.
PRINT
Click the Print log button on the Log dialogue box and the Notepad will be displayed
showing the content of the logbook.
212
To Next Page
Loading...
