S
WITCH
 M
ANAGEMENT
1-2
The switch’s CLI configuration program, Web interface, and SNMP 
agent allow you to perform the following management functions:
• Set user names and passwords for up to 16 users
• Set an IP interface for a management VLAN
• Configure SNMP parameters 
• Enable/disable any port 
• Set the speed/duplex mode for any port 
• Configure up to 255 IEEE 802.1Q VLANs 
• Enable GVRP automatic VLAN registration
• Configure IGMP multicast filtering
• Upload and download of system firmware via TFTP
• Upload and download of switch configuration files via TFTP
• Configure Spanning Tree parameters
• Configure Class of Service (CoS) priority queuing
• Configure up to six static or LACP trunks
• Enable jumbo frame support
• Enable port mirroring
• Set broadcast storm control on any port
• Display system information and statistics 
b_mgmt.book  Page 2  Tuesday, July 8, 2003  5:24 PM