SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart User Manual

C OMMAND L INE I NTERFACE
3-64
Example
SNMP Commands
Controls access to this switch from SNMP management stations, as
well as the error types sent to trap managers.
Console#show tacacs-server
Remote TACACS server configuration:
Server IP address: 10.11.12.13
Communication key with radius server:
Server port number: 49
Console#
Command Function Mode Page
snmp-server
community
Sets up the community access string to
permit access to SNMP commands
GC 3-65
snmp-server
contact
Sets the system contact string GC 3-66
snmp-server
location
Sets the system location string GC 3-66
snmp-server host Specifies the recipient of an SNMP
notification operation
GC 3-67
snmp-server
enable traps
Enables the device to send SNMP
notifications (i.e., SNMP traps)
GC 3-69
snmp ip filter Sets IP addresses of clients allowed to
management access to the switch via
SNMP
GC 3-70
show snmp Displays the status of SNMP
communications
NE,
PE
3-71
b_mgmt.book Page 64 Tuesday, July 8, 2003 5:24 PM

SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Specifications

General

Brand	SMC Networks
Model	SMC EZ Switch 10/100/1000 SMCGS8P-Smart
Category	Switch
Language	English