SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart User Manual

C OMMAND L INE I NTERFACE
3-142
switchport gvrp
Use this command to enable GVRP for a port. Use the no form to
disable it.
Syntax
switchport gvrp
no switchport gvrp
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
show garp timer Shows the GARP timer for the
selected function
NE,
PE
3-145
Global Commands
bridge-ext gvrp Enables GVRP globally for the
switch
GC 3-146
show bridge-ext Shows bridge extension
configuration
PE 3-147
Console(config)#interface ethernet 1/1
Console(config-if)#switchport gvrp
Console(config-if)#
Command Function Mode Page
b_mgmt.book Page 142 Tuesday, July 8, 2003 5:24 PM

SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Specifications

General

Brand	SMC Networks
Model	SMC EZ Switch 10/100/1000 SMCGS8P-Smart
Category	Switch
Language	English