S
YSTEM
M
ANAGEMENT
C
OMMANDS
3-45
logging facility
Use this command to set the facility type for remote logging of
syslog messages. Use the no form to return the type to the default.
Syntax
logging facility type
no logging facility type
type - A number that indicates the facility used by the syslog
server to dispatch log messages to an appropriate service.
(Range: 16-23)
Default Setting
23
Command Mode
Global Configuration
Example
logging trap
Use this command to limit syslog messages saved to a remote
server based on severity. Use the no form to return the remote
logging of syslog messages to the default level.
Syntax
logging trap level
no logging trap level
level - One of the level arguments listed below.
Console(config)#logging facility 19
Console(config)#
b_mgmt.book Page 45 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
Need help?
General
