SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart User Manual

I NTERFACE C OMMANDS
3-103
Command Mode
Privileged Exec
Command Usage
Statistics are only initialized for a power reset. This command
sets the base value for displayed statistics to zero for the
current management session. However, if you log out and back
into the management interface, the statistics displayed will
show the absolute value accumulated since the last power
reset.
Example
The following example clears statistics on port 5.
show interfaces status
Use this command to display the status for an interface.
Syntax
show interfaces status interface
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
• vlan vlan-id (Range: 1-4094)
Default Setting
Shows the status for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Console#clear counters ethernet 1/5
Console#
b_mgmt.book Page 103 Tuesday, July 8, 2003 5:24 PM

SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Specifications

General

Brand	SMC Networks
Model	SMC EZ Switch 10/100/1000 SMCGS8P-Smart
Category	Switch
Language	English