S
YSTEM
M
ANAGEMENT
C
OMMANDS
3-29
hostname
Use this command to specify or modify the host name for this
device. Use the no form to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255
characters)
Default Setting
None
Command Mode
Global Configuration
Example
System Status Commands
show
startup-config
Displays the contents of the
configuration file (stored in Flash
memory) that is used to start up the
system
PE 3-48
show
running-config
Displays the configuration data currently
in use
PE 3-51
show system Displays system information NE,
PE
3-52
show users Shows all active console and Telnet
sessions, including user name, idle time,
and IP address of Telnet client
NE,
PE
3-53
show version Displays version information for the
system
NE,
PE
3-54
Console(config)#hostname SMC8612T
Console(config)#
Command Function Mode Page
b_mgmt.book Page 29 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
Need help?
General
